5 Inch Gutters in Northwest Arkansas

For many homes, yes. Consider 5 inch when a run is under 40 feet with one downspout or over 40 feet with two or more, the gutter does not overflow in average rain, and the roof is asphalt shingle with proper drip edge. If an upper roof with gutters drains onto that section, it needs a bigger gutter.

Skip 5 inch where upper roofs with gutters drain onto a lower roof, on long runs that cannot get a second downspout, and in valleys where water comes off fast and overflows in heavy rain. Metal roofs shed water fast enough that 6 inch is usually the better call. In a Northwest Arkansas spring storm, those are the spots that overflow first.

Yes, 5 inch is the cost-effective option, and it handles average rainfall on a typical single-family roof. The savings only make sense if it keeps up with your roof, though. An overflowing gutter costs more in fascia and foundation damage than the difference in size. Your written estimate tells you honestly which size your roofline needs.

5 inch comes in both K-style and half-round, in aluminum as well as copper. K-style is the profile most commonly used on homes, and colored aluminum lets you match it to your trim. Half-round in 5 inch is a good choice when you want a traditional look on a home that does not need the extra capacity.

On the right roof, yes. A 5 inch gutter with enough downspouts handles average rainfall well, and the key is capacity at the outlets. We pair 5 inch with 2 by 3 or 3 by 4 inch downspouts depending on roof area, and where a run keeps overflowing, a larger or added downspout often fixes it without replacing the gutter.

Yes. BroGuard metal micro-mesh fits 5 inch gutters and keeps oak leaves, acorns and hickory hulls out while rain flows through. Guarding a 5 inch gutter matters, because a smaller trough loses capacity faster once debris starts to build.